Published · Updated · 6 min read
BYD SEALION 6 Front Bumper Parts: Replacement Guide and OE Numbers
What makes up a BYD SEALION 6 front bumper, from cover and grilles to beam, absorbers and sensor holders, plus radar notes and how bulky parts are shipped.
A SEALION 6 front bumper repair usually needs more than the cover: grilles, brackets, clips and sometimes the beam and absorber as well. Order them together, matched by VIN, so the job is not held up by one missing bracket.
Which parts make up the SEALION 6 front bumper?
The bumper is an assembly of separate parts, each with its own OE number. In a light impact only the cover and a few clips may need replacing. In a harder one, the beam, absorber and brackets behind it often bend or crack too, even when the cover looks only scuffed.
| Part | Position | Note |
|---|---|---|
| Bumper cover | Outer front face | Ships unpainted in primer; sensor holes vary by trim |
| Lower grille and intake trims | Lower centre and sides | Often clip-on; check for broken tabs on the old part |
| Bumper beam | Behind the cover | Replace if bent after a hard impact |
| Energy absorber | Between beam and cover | Foam or plastic; does its job once |
| Mounting brackets | Sides, under headlights | Left and right are separate parts |
| Parking-sensor holders | Inside the cover | Needed only where sensors are fitted |
| Fog or reflector lamps | Lower corners | Left and right differ; fitment varies by market |
Is the SEALION 6 front bumper the same as the SEAL U?
It matches the SEAL U DM-i, which is the European name for the same plug-in hybrid. It does not match the battery-electric SEAL U. The EV and DM-i versions use different front bumpers, and rear bumpers can differ too.
This is the most common reason a bumper does not fit. Send the VIN and we confirm which version you have before we quote.
Within the SEALION 6 itself, details can still change with trim, market and model year. Sensor holes, fog lamp openings and grille styles are the usual differences. A photo of the front of the car helps us check these quickly.
Which SEAL U and SEALION 6 parts interchangeShared parts, and where the versions differ.What else should you order with the bumper cover?
- All clips and fixings for the cover. Old ones often break on removal.
- Brackets on both sides, even if only one looks damaged.
- Grille and intake trims, which crack easily in a front impact.
- Sensor holders, if the car has parking sensors.
- The headlight, if its mounting tabs are broken. Repair brackets exist for some cases.
Does radar or sensor calibration matter after a bumper repair?
If the car has a front radar or camera for driver-assistance features, it may need calibration after the bumper is replaced or refitted. Which sensors are fitted can differ by trim and market. We confirm by VIN.
Calibration needs the right equipment and a level work area. Plan for it before the car goes back to the customer. A sensor holder or bracket fitted at the wrong angle can stop a sensor from working properly.
How are bulky bumper parts packed and shipped?
Bumper covers are large and light, so freight is charged on size more than weight. Each cover is wrapped and boxed with corner protection. We send photos of the parts and packing before dispatch.
The cover arrives unpainted in primer, ready for your body shop to prepare and paint in the original colour. Small parts such as clips, brackets and sensor holders are bagged and labelled, then packed in the same carton or a separate one, so nothing gets lost in transit.
For one or two bumpers, courier or air freight is usually the practical choice. For several cars, sea freight with other parts in a consolidated shipment is better value. We quote the options, FOB or CIF, so you can compare.
There is no fixed minimum order. A single bumper repair kit is welcome, and so is a mixed order for several cars in one shipment.
Bumper parts for SEALION modelsCovers, grilles, beams, absorbers and brackets.Send us the VIN and photos of the damage, and we will confirm the full list of bumper parts within 24 hours.
Talk directly to the parts desk
Send a part list, a VIN or a photo. We answer with fitment, price and shipping.